Spouse Super Contribution Tax Offset Calculator Australia

Work out the spouse super contribution tax offset. See the eligible contribution, the offset you can claim, the net cost, and the income cut-out that ends it.

Spouse Super Contribution Tax Offset Calculator Australia
A$
A$
A$
Advanced options
A$
A$
Spouse contribution tax offset —
Offset you can actually use —
Offset wasted (tax too low) —
Contribution the offset is measured on —
Your contribution within that base —
Contribution beyond the base —
Offset rate —
Spouse income above the full-offset threshold —
Spouse income headroom before the cut-out —
Net cost after the offset —
Immediate return on the contribution —
Offset denied by the super caps —
Spouse balance after the contribution —
Spouse after-tax cap remaining —
Your income tax before the offset —
Total offset over the years chosen —
Projected value of the contributions —

We always strive to use the latest data for every variable so our results and reports are as accurate as possible. Even so, errors are possible — you should not rely on this tool or its report alone, and we accept no liability for any decision made based on it.

What it does

The Spouse Super Contribution Calculator works out the tax offset you can claim for putting after-tax money into a low-income spouse's superannuation, how much of your contribution actually earns the offset, and what the contribution costs you once the offset is counted.

Data sources & parameters

The figures below drive this calculator. We keep them aligned with the latest official guidance, and each result recalculates automatically whenever a value changes.

ParameterValueSourceLast updated
Spouse contribution tax offset rate0.18ato.gov.auEffective 2026-07-01Spouse contribution tax offset rate
Maximum spouse contribution eligible for the 18% offset3,000ato.gov.auEffective 2026-07-01Maximum spouse contribution eligible for the 18% offset
Maximum tax offset for contributing to a low-income spouse's super (18% of $3,000)540ato.gov.auEffective 2026-07-01Maximum tax offset for contributing to a low-income spouse's super (18% of $3,000)
Spouse income thresholds: full offset if spouse income <= $37,000, phasing to nil at $40,000Rate scheduleato.gov.auEffective 2026-07-01Spouse income thresholds: full offset if spouse income <= $37,000, phasing to nil at $40,000
Non-concessional contributions cap130,000ato.gov.auEffective 2026-07-01Corrected 2026-08-27: 120000 to 130000 (official-verified)
General transfer balance cap2,100,000ato.gov.auEffective 2026-07-01Corrected 2026-08-27: 2000000 to 2100000 (official-verified). Source link replaced (old URL 404); audit 2026-09-23
Resident marginal tax bracketsRate scheduleato.gov.auEffective 2026-07-01FY2026-27 rates (15% on $18,201-$45,000). Ends 2027-06-30: the scheduled 2027-07-01 row (14%) takes over. audit 2026-09-23
LITO maximum700ato.gov.auEffective 2024-07-01Confirmed unchanged and current for FY2026-27 (ATO). Open-ended (was to 2027-06-30): statutory, not indexed, no change legislated; audit 2026-09-23
LITO taper 1 start37,500ato.gov.auEffective 2024-07-01Confirmed unchanged and current for FY2026-27 against the official source. Open-ended (was to 2027-06-30): statutory, not indexed, no change legislated; audit 2026-09-23
LITO taper 2 start45,000ato.gov.auEffective 2024-07-01Confirmed unchanged and current for FY2026-27 against the official source. Open-ended (was to 2027-06-30): statutory, not indexed, no change legislated; audit 2026-09-23
LITO phase-out end66,667ato.gov.auEffective 2024-07-01Confirmed unchanged and current for FY2026-27 against the official source. Open-ended (was to 2027-06-30): statutory, not indexed, no change legislated; audit 2026-09-23
LITO taper rate 10.05ato.gov.auEffective 2024-07-01Confirmed unchanged and current for FY2026-27 against the official source. Open-ended (was to 2027-06-30): statutory, not indexed, no change legislated; audit 2026-09-23
LITO taper rate 20.015ato.gov.auEffective 2024-07-01Confirmed unchanged and current for FY2026-27 against the official source. Open-ended (was to 2027-06-30): statutory, not indexed, no change legislated; audit 2026-09-23

We always strive to use the latest data for every variable so our results and reports are as accurate as possible. Even so, errors are possible — you should not rely on this tool or its report alone, and we accept no liability for any decision made based on it.

The formula

Eligible base = contribution base − (spouse income − full-offset threshold); offset = min(eligible contribution × offset rate, maximum offset), limited to your income tax

How it works

It reduces the eligible contribution base dollar for dollar by the amount your spouse's income exceeds the full-offset threshold, takes the offset rate on whatever is left, caps the result at the maximum offset, then checks the spouse's total super balance and after-tax contributions cap. Because the offset is non-refundable, it is finally limited to your own income tax.

Where it is used

  • Sizing a spouse contribution so none of it falls outside the offset
  • Checking whether a pay rise has pushed your spouse past the cut-out
  • Comparing the offset with the government co-contribution for the same money

Worked example

With your spouse on A$32,000.00, the whole A$3,000.00 contribution sits inside the eligible base, so the offset is … and your income tax of … is large enough to absorb it. The contribution costs you … net, an immediate return of …, and the spouse balance moves to ….

What the spouse super contribution offset does

A spouse super contribution is money you pay from your own after-tax income into your partner's superannuation account, and the tax offset is the reward for doing it. It is one of the smaller incentives in the Australian system, but it is also one of the easiest to claim and one of the few that directly rewards evening up two retirement balances rather than growing one.

The mechanics are simple. A fixed percentage of an eligible contribution comes off your income tax, up to a maximum. The complication is the word eligible, because the amount that qualifies depends entirely on how much your spouse earns, and it disappears completely once their income passes the cut-out.

This calculator resolves that in one step. Enter the contribution, your spouse's income and your own taxable income, and it shows the offset you can claim, how much of the contribution earned it, and what the whole exercise costs you net.

Who the offset is aimed at

The design intent is a household where one partner has stepped back from paid work. Career breaks for children, part-time work, study, illness or caring responsibilities all produce the same pattern: a couple with one healthy super balance and one that has stalled.

Super is an individual asset. It does not pool between partners, and the balance gap that opens during a career break rarely closes on its own. The spouse contribution offset is a modest nudge towards closing it, and it is worth reading alongside contribution splitting, which moves employer contributions across rather than new money.

Eligibility is straightforward on the personal side. You need to be spouses, including de facto, living together, both Australian residents, and the contribution has to be made from after-tax money to a complying fund in your spouse's name. What is not allowed is claiming a tax deduction for the same contribution, since you cannot have the deduction and the offset for one payment.

How the spouse income test works

This is the part people get wrong, and it is worth being precise about.

The offset is not calculated on your contribution. It is calculated on an eligible contribution base, and that base shrinks by one dollar for every dollar of spouse income above the lower threshold. Below the threshold the full base applies. Between the threshold and the cut-out, the base is the full base less the excess income. From the cut-out upwards, the base is nil.

Two things follow. First, a contribution larger than the base earns nothing extra. If your spouse's income has cut the base in half, contributing the full amount gets you the same offset as contributing half of it, and the rest is simply money in super with no offset attached. The calculator separates the contribution within the base from the part beyond it so this is visible.

Second, the income being tested is not the figure on their tax return. It is assessable income plus reportable fringe benefits plus reportable employer superannuation contributions. That last item matters. A partner who salary sacrifices heavily can have a low taxable income and still fail the test, because the sacrificed amount is added back for this purpose. Use the broader figure in the calculator, not the taxable income.

The two caps that can cancel the offset

Even when the income test is passed, two superannuation rules can remove the offset entirely.

The first is your spouse's total super balance at 30 June of the previous financial year. If it was at or above the general transfer balance cap, the offset is not available. This is the rule that catches couples where the lower earner nonetheless has a large balance, perhaps from an inheritance or an earlier career.

The second is your spouse's non-concessional contributions cap. The money is treated as their after-tax contribution, so it consumes their cap, not yours. If they have already used the cap this year, or if your contribution would push them over it, the offset is lost and the excess contribution creates its own tax problem.

The calculator applies both tests and reports the offset that would have been available as denied by the caps, so a zero result is never ambiguous.

The offset is non-refundable

The last constraint is on your side of the ledger. This is a non-refundable tax offset, which means it reduces the tax you owe but never turns into a refund of its own. It also cannot reduce the Medicare levy, only income tax.

If your income tax for the year is smaller than the offset, part of it is simply lost. It does not carry forward to a future year and it is not paid out. That situation is more common than it sounds, particularly for a retiree making a contribution for a younger spouse, or in a year with large deductions.

The tool calculates your income tax after the Low Income Tax Offset, caps the spouse offset at that figure, and shows any wasted amount separately. If the wasted amount is large, the contribution may still be a good idea on retirement grounds, but it should be judged on those grounds rather than on a tax benefit that will not arrive.

Reading the results and what to do next

The headline figure is the offset entitlement. Beneath it, the offset you can actually use tells you what will show up in your assessment, and the net cost is the contribution less that amount.

The immediate return on the contribution restates the offset as a percentage. At the full offset on the full base it is a strong first-year return by any standard, and it is the single most persuasive number in the results. It falls quickly as the eligible base shrinks, which is exactly why sizing the contribution to the base rather than to a round number is worth a minute of arithmetic.

The projection at the bottom shows what repeating the contribution each year could be worth in the fund at your chosen return. It is a straightforward compounding of the contributions only, with no allowance for fund fees, insurance premiums or investment earnings tax, so treat it as an upper bound rather than a forecast.

Before contributing, check with the fund that it accepts spouse contributions and that your spouse meets the age and work conditions, and keep the payment receipt for your tax return.

These figures are an estimate for planning, not financial or tax advice. Contribution rules, caps and thresholds change, and your circumstances may differ, so confirm anything material with your fund, a licensed adviser or the ATO before you act.

About This Tool: Spouse Super Contribution

Spouse super contribution: use this tool to get an instant, accurate estimate. The figures follow official ATO guidance and every rate and threshold is kept up to date for 2026. Adjust the inputs above to match your situation, or browse all our calculators to plan your next step.

Tax year 2026

Frequently asked questions

What is the spouse super contribution tax offset?
It is a tax offset for making an after-tax contribution to the superannuation account of a low-income or non-working spouse. The offset is a fixed percentage of the eligible contribution, capped at a maximum, and it reduces your own income tax. It is claimed in your tax return, not paid into the fund.
How much can my spouse earn before the offset stops?
The full offset applies while their income stays at or under the lower threshold. Above that, the contribution the offset is measured on falls by one dollar for every extra dollar of income, so the offset shrinks steadily and reaches nil at the cut-out. The calculator shows how much income headroom is left before that happens.
What counts as spouse income for this test?
It is broader than taxable income. It is their assessable income plus reportable fringe benefits plus reportable employer super contributions, such as salary sacrifice. Someone with a modest salary but a large salary sacrifice arrangement can fail the test even though their taxable income looks low.
Does the contribution count against my spouse's contribution caps?
Yes. The money is an after-tax contribution made on their behalf, so it counts towards their non-concessional cap, not yours. If it would push them over that cap the offset is not available, and the calculator applies that test using their contributions already made this year.
What if my spouse's super balance is already large?
The offset is not available if their total super balance at 30 June of the previous financial year was at or above the general transfer balance cap. The calculator applies that test and shows the offset that would otherwise have been available as denied by the caps.
Is the offset refundable if I pay little tax?
No. It is non-refundable, so it can only reduce your income tax to zero and any remainder is lost, not carried forward or paid out. If your own tax is small the contribution may still be worth making for retirement reasons, but the offset itself adds nothing, and the calculator shows the wasted amount separately.
Can I claim the offset if I make the contribution but my spouse is not working?
Yes, a non-working or low-income spouse is exactly the situation the offset targets, since it rewards contributing to a lower-earning partner's super regardless of whether that partner is employed at all.
Does the spouse receiving the contribution need to do anything?
The contribution simply needs to be accepted into their complying super fund account, and their fund needs to be able to accept spouse contributions, but the receiving spouse does not need to claim anything themselves for you to get the offset.

About the author

Taha Kheirandish

Written and reviewed by

Taha Kheirandish

Economics student and independent researcher

Taha Kheirandish reads tax codes the way other people read maps — to find out where a system actually leads, not where it claims to go.

He is an economics student, and his work here is comparative by design. A pension deferral bonus in Quebec, a commuting allowance in Germany, a rent-increase ceiling in the Netherlands: each is a decision a government made about how money should move, and each reads differently once you set it beside eight others. He builds and checks these calculators across nine markets from primary sources — the regulation rather than a summary of it, the ministry’s own circular rather than a news item quoting it.

That is the editorial standard of the site as well as his habit. Every rate, threshold and bracket here carries the document it was read from and the date it takes effect, and gets re-checked when the law moves rather than when someone happens to notice.

He is a researcher, not a licensed adviser, and nothing on this site is personal financial advice. It is arithmetic done carefully with its sources shown — so that you can check it, and take it to someone who is.

Leave a Reply

Your email address will not be published. Required fields are marked *